Honda CR-V III 2.2 i-CTDi (N22A2)
2007-2012 · Diesel · 103 kW / 140 hp · 2204 cm³
Engine oil
| Capacity | 5.3 l |
|---|---|
| Specification | ACEA B4 |
| Viscosity | 5W-30 |
| Change interval | 12 000 km / 12 months |
Tyre pressure (bar)
| Front | 2.3 |
|---|---|
| Rear | 2.3 |
| Front (fully loaded) | 2.5 |
| Rear (fully loaded) | 2.9 |
| Tyre sizes | 225/65 R17, 225/60 R18 |
| Wheel bolt torque | 108 Nm |
Bulbs
| Low beam | H7 |
|---|---|
| High beam | HB3 |
| Fog lights | H11 |
| Front indicators | PY21W |
| Brake lights | P21/5W |
| Reverse lights | P21W |
Engine
| Coolant | 7 l · Honda Type 2 (blue) |
|---|---|
| Timing drive | chain |
| Battery | 70 Ah standard |
| Fuel tank | 58 l |
Advertisement728 × 90
Known weak points
- Diesel particulate filter clogging on short trips, requiring forced regeneration or causing warning lights
- Fuel pump and injector wear causing hard starting and increased engine noise
- Turbocharger wear leading to smoke on acceleration and underboost codes
- EGR valve clogging causing rough idle and hesitation under load
- Rear differential and PTU (power transfer unit) wear on AWD models causing whining noises
- Timing chain tensioner wear causing a rattle on cold start that can worsen over time